Hammerfly: Difference between revisions

Line 2:

[[File:Hammerfly-wall.mp4|right|300px|gif|muted]]

~~Hammer fly~~ is the most common flight technique for 2 tees.

'''''Hammerfly''''' is the most common flight technique for 2 tees.

To ~~hammer fly~~:

To hammerfly:

* Stack 2 tees on top of each other (use a wall to line up)

* The lower tee continuously hammers the upper tee

* The lower tee continuously [[Hammer|hammers]] the upper tee

* The upper tee (the ‘driver’) hooks the lower tee

* The upper tee (the ‘driver’) [[Hook|hooks]] the lower tee

The hammer hits propel the driver upwards

Line 34:

* Choose a tee to drive

* Have the driving tee jump over the other tee

* Have the driving tee [[jump]] over the other tee

* Start the usual hammerfly cycle

Line 41:

[[File:Hammerfly-drive.mp4|right|300px|gif|muted]]

Driving allows the driving tee to direct the ~~hammer fly~~ to the side. When done well, this allows for horizontal flight.

Driving allows the driving tee to direct the hammerfly to the side. When done well, this allows for horizontal flight.

As the driver, drive by moving in the desired direction directly after you got hit by the hammer.

Start with very light movement. The further you move each hit, the more horizontal, but also unstable the ~~hammer fly~~ will get.

Start with very light movement. The further you move each hit, the more horizontal, but also unstable the hammerfly will get.

=== Dropping While ~~Hammer flying~~ ===

=== Dropping While Hammerflying ===

[[File:Hammerfly-drop.mp4|right|300px|gif|muted]]

Some parts require you to drop a bit during a ~~hammer fly~~.

Some parts require you to drop a bit during a hammerfly.

If the driver still has double jump available, you could:

* Stop the ~~hammer fly~~ cycle shortly

* Stop the hammerfly cycle shortly

* Have the driver double jump to cancel the falling speed

* Start the ~~hammer fly~~ cycle again

* Start the hammerfly cycle again

Without double jump, you can:

Line 72:

[[File:Hammerfly-kinta.mp4|right|300px|gif|muted]]

Kinta (or ~~‘Kinta fly’~~) is a special but much harder variant of ~~hammer fly~~. It is usually done below a ceiling and allows horizontal flight in much tighter space.

Kinta (or ‘Kintafly’) is a special but much harder variant of hammerfly. It is usually done below a ceiling and allows horizontal flight in much tighter space.

For kinta, both tees have to move in the desired direction at the same time. Don’t move continuously, but instead like you would move while driving.

Line 80:

To initiate kinta successfully, start moving at the same time. Usually you start moving in the direction once the upper tee is near the ceiling.

== ~~Speed fly~~ ==

== Speedfly ==

~~Speed fly~~ can be attempted during a usual ~~hammer fly~~ to reach high vertical velocity.

Speedfly can be attempted during a usual hammerfly to reach high vertical velocity.

Initiate speed fly as the driver by double jumping just before you will get hammered. If you got the timing, you will suddenly gain a lot of height than usual on the hammer hit.

Line 92:

Aoe made a [https://www.youtube.com/watch?v=nqSCCxGYw1E tutorial video covering speed fly].

== ~~Triple hammer fly~~ ==

== Triplefly ==

A fly technique similar to ~~hammer fly~~, but with the addition that the hammer also hooks a 3rd tee.

A fly technique similar to hammerfly, but with the addition that the hammer also hooks a 3rd tee. The third tee can be [[Freeze|frozen]] or deep, because it has to do nothing.

It requires the tee that hammers to also hook between hammers.

@@ Line 2: / Line 2: @@
 [[File:Hammerfly-wall.mp4|right|300px|gif|muted]]
-Hammer fly is the most common flight technique for 2 tees.
+'''''Hammerfly''''' is the most common flight technique for 2 tees.
-To hammer fly:
+To hammerfly:
 * Stack 2 tees on top of each other (use a wall to line up)
-* The lower tee continuously hammers the upper tee
+* The lower tee continuously [[Hammer|hammers]] the upper tee
-* The upper tee (the ‘driver’) hooks the lower tee
+* The upper tee (the ‘driver’) [[Hook|hooks]] the lower tee
 The hammer hits propel the driver upwards
@@ Line 34: / Line 34: @@
 * Choose a tee to drive
-* Have the driving tee jump over the other tee
+* Have the driving tee [[jump]] over the other tee
 * Start the usual hammerfly cycle
@@ Line 41: / Line 41: @@
 [[File:Hammerfly-drive.mp4|right|300px|gif|muted]]
-Driving allows the driving tee to direct the hammer fly to the side. When done well, this allows for horizontal flight.
+Driving allows the driving tee to direct the hammerfly to the side. When done well, this allows for horizontal flight.
 As the driver, drive by moving in the desired direction directly after you got hit by the hammer.
-Start with very light movement. The further you move each hit, the more horizontal, but also unstable the hammer fly will get.
+Start with very light movement. The further you move each hit, the more horizontal, but also unstable the hammerfly will get.
-=== Dropping While Hammer flying ===
+=== Dropping While Hammerflying ===
 [[File:Hammerfly-drop.mp4|right|300px|gif|muted]]
-Some parts require you to drop a bit during a hammer fly.
+Some parts require you to drop a bit during a hammerfly.
 If the driver still has double jump available, you could:
-* Stop the hammer fly cycle shortly
+* Stop the hammerfly cycle shortly
 * Have the driver double jump to cancel the falling speed
-* Start the hammer fly cycle again
+* Start the hammerfly cycle again
 Without double jump, you can:
@@ Line 72: / Line 72: @@
 [[File:Hammerfly-kinta.mp4|right|300px|gif|muted]]
-Kinta (or ‘Kinta fly’) is a special but much harder variant of hammer fly. It is usually done below a ceiling and allows horizontal flight in much tighter space.
+Kinta (or ‘Kintafly’) is a special but much harder variant of hammerfly. It is usually done below a ceiling and allows horizontal flight in much tighter space.
 For kinta, both tees have to move in the desired direction at the same time. Don’t move continuously, but instead like you would move while driving.
@@ Line 80: / Line 80: @@
 To initiate kinta successfully, start moving at the same time. Usually you start moving in the direction once the upper tee is near the ceiling.
-== Speed fly ==
+== Speedfly ==
-Speed fly can be attempted during a usual hammer fly to reach high vertical velocity.
+Speedfly can be attempted during a usual hammerfly to reach high vertical velocity.
 Initiate speed fly as the driver by double jumping just before you will get hammered. If you got the timing, you will suddenly gain a lot of height than usual on the hammer hit.
@@ Line 92: / Line 92: @@
 Aoe made a [https://www.youtube.com/watch?v=nqSCCxGYw1E tutorial video covering speed fly].
-== Triple hammer fly ==
+== Triplefly ==
-A fly technique similar to hammer fly, but with the addition that the hammer also hooks a 3rd tee.
+A fly technique similar to hammerfly, but with the addition that the hammer also hooks a 3rd tee. The third tee can be [[Freeze|frozen]] or deep, because it has to do nothing.
 It requires the tee that hammers to also hook between hammers.