锤击飞行
Hammerfly is the most common flight technique for 2 tees, which uses the 
Hammer as its main tool
To hammerfly:
The hammer hits propel the driver upwards
The continuous hook:
- Pulls the hammering tee upwards
- Keeps the two tees into hammer range
This way you can fly upwards indefinitely.
Timing
Spamming the hammer and hook won’t get you very high.
As the hammering tee, try to hammer whenever you just bounced off the other tee.
As the driver, never let go of the other tee in the air. Hooking every second hammer hit the lower tee does is a good rhythm.
Without Lining Up
Whenever you don’t have a wall to line up in a tower:
- Choose a tee to drive
- Have the driving tee jump over the other tee
- Start the usual hammerfly cycle
Driving
Driving allows the driving tee to direct the hammerfly to the side. When done well, this allows for horizontal flight.
As the driver, drive by moving in the desired direction directly after you got hit by the hammer.
Start with very light movement. The further you move each hit, the more horizontal, but also unstable the hammerfly will get.
Dropping While Hammerflying
Some parts require you to drop a bit during a hammerfly.
If the driver still has double jump available, you could:
- Stop the hammerfly cycle shortly
- Have the driver double jump to cancel the falling speed
- Start the hammerfly cycle again
Without double jump, you can:
- Stop the hammering
- Have the driver hook the lower tee again and again to bump into each other
The bumping will slow down the drop significantly. This way you can start the cycle any time you want.
Note however, that you want to have strong hook as the driver for this, else the bumping might not work as well.
Kinta
Kinta (or Kintafly) is a special but much harder variant of hammerfly. It is usually done below a ceiling and allows horizontal flight in much tighter space.
For kinta, both tees have to move in the desired direction at the same time. Don’t move continuously, but instead like you would move while driving.
What you want to achieve is that both tees stay above each other. Note that you might have to adapt your hammering rhythm.
To initiate kinta successfully, start moving at the same time. Usually you start moving in the direction once the upper tee is near the ceiling.
Speedfly
Speedfly is a flying technique that allows you to fly much faster upwards
Speedfly can be attempted during a usual hammerfly to reach high vertical velocity.
Initiate speedfly as the driver by double jumping just before you will get hammered. If you got the timing, you will suddenly gain a lot of height than usual on the hammer hit.
To keep the speed up, the hammering tee always has to hammer just before bumping into the upper tee, which would break it.
Pretty much every time window for this trick is very narrow.
Aoe made a tutorial video covering speedfly.
Triplefly
三人飞行 是一种飞行技巧，可以让三个人一起飞行。
这种飞行技巧类似于锤子飞，但是锤子玩家还会钩住第三个Tee。第三个Tee可以被冻结或深度冻结，因为它不需要做任何事情。
这需要使用锤子的玩家在锤击和钩索中来回切换
这个技巧要求使用锤子的玩家对锤击飞行有较高的熟练度。
同时也允许第三个tee钩住其它tee，依次循环，来达到多人飞行的效果。